Hot melter Cold Compactor Shredder Pelletizing line Squeezer Series Supporting Equipments
  • EPS Cold Compactor CF-CP Line

EPS Cold Compactor CF-CP Line 250-300kg/h

EPS cold compactor CF-CP Line is used for the big size waste recycling center, the EPS, EPP, EPS material can all treated by this unit. The material changes density from typically 30 kg/m3 to 330 kg/m3. It becomes a recyclable commodity of high value for producers of recycled plastic pellets.
Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. Due to the low density of polystyrene foam, it is not economical to collect. However, if the waste material goes through an initial compaction process. The material changes density from typically 30 kg/m3 to 330 kg/m3. It becomes a recyclable commodity of high value for producers of recycled plastic pellets.

Qinfeng Machinery is just making the Styrofoam compactor to solve this problem. It can reduce the size of the EPS material, the compressing ratio can reach1:30-1:50. The finished products is the EPS blocks, the density can reach 300kg/ m3. It is easy for the customer to deliver the EPS material to another recycling processing unit.

This styrofoam compactor is mainly used for waste disposal, including: paper, EPS (polystyrene foam), EPE PUR EVA and so on. The material through the mill to be ground into a block compaction process. Through numerous experiments on the Styrofoam compactor and continuous improvement, to create a superior performance.

Styrofoam compactor is controlled unit is based on PLC automatic control system and a peripheral circuit performance is extremely reliable. First with the crusher and the screen on this compactor to get the small size of the material. Then after the material fall down into the screw, the main motor push the material forward in the screw. Meanwhile the hydraulic system on the mould head close to press the EPS material, the EPS material will come out by blocks. It can reduce 30-50 times space for the material and easy to move an delivery. All the parts of the machine we composed into one machine, save cost, power consumption, space for the machine. The EPS blocks can be crushed again to process to the next unit.

The styrofoam compactor CF-CP line which capacity is 250-300kg/h from Qinfeng Machinery, included the conveyer belt, crusher, fan deliver, silo system and compactor part. The Styrofoam compactor CF-CP line is suitable for the big super market, big seafood market. It is also fit for the big size EPS waste recycling companies to compact the waste material. The customer will get the EPS blocks with the 380mm x 380mm size.

Spread the love

CF-CP Line compactor is used for the big size waste recycling center, the EPS, EPP, EPS material can all treated by this unit, and the material changes density from typically 30 kg/m3 to 330 kg/m3 and becomes a recyclable commodity of high value for producers of recycled plastic pellets.

EPS Cold Compactor CF-CP Line
EPS Cold Compactor CF-CP Line
EPS Cold Compactor CF-CP Line
EPS Cold Compactor CF-CP Line
EPS Cold Compactor CF-CP Line
I Conveyer Belt
  • 1.Deliver Capacity: 500-600kg/h
  • 2.Motor Power: 2.2kw
  • 3.Transmission drive: By Gearbox
  • 4.belt size: 4000mmx1000mm
  • 5.Weight: 900kg
EPS Cold Compactor CF-CP Line
II Crusher
  • 1.Model: CF-CR400
  • 2.Gearbox brand:Guomao
  • 3.Motor Power:3KW x 4
  • 4.Rotation blades: 14+15+14+15 sets
  • 5.Check window install the induction switch
  • 6.Screen hole size ¢50mm
  • 7.Capacity:250-300kg/h
  • 8.Weight:1250kg
  • 9.Crusher tank size:1000mm *900mm
EPS Cold Compactor CF-CP Line
III Fan Delivery
  • 1.Fan power:4KW
  • 2.Pipe material:304 Stainless steel
  • 3.Pipe diameter:φ159cm
  • 4.Fan brand: Wuxi Jingyang
EPS Cold Compactor CF-CP Line
V Compactor
  • Model: CF-CP380
  • Capacity:250-300kg/h
  • Screw Diameter:φ370mm
  • Input size:φ600mm
  • Screw rotation speed:42rpm
  • Main motor:15kw
  • Bearing brand:ZWZ bearing
  • Hydraulic motor:1.5kw
  • Production size: 380x380mm
  • Weight: 1300kg
EPS Cold Compactor CF-CP Line
IV Silo System
  • 1.Capacity:10 Cubic Meter
  • 2.Silo material:Filter Fabric
  • 3.Weight:80kg
  • 4.Holder material:40*40 Galvanized square tube
  • 5.The holder features simple operation, easy to clean, remove convenient assembly.

If you have any problems that can't be solved, you can leave your contact information, so that we can communicate with you in time.

Popular related products

CF-HM100 EPS Hot Melting Machinery
CF-HM100 EPS Hot Melting Machinery
CF-HM100 EPS Hot Melting Machinery

CF-HM100 EPS Hot Melting Machinery: This CF-HM100 EPS hot melting machinery can process EPS EPP EP…

CF-HM200 EPS Hot Melting Machinery
CF-HM200 EPS Hot Melting Machinery
CF-HM200 EPS Hot Melting Machinery

CF-HM200 EPS Hot Melting Machinery: CF-HM200 EPS hot melting machinery is used in medium-sized was…

Scan the code