CF-HM200 EPS Hot Melting Machinery:

CF-HM200 EPS hot melting machinery is used in medium-sized waste recycling centers to process EPS, EPP and EPE materials through this unit, and the space of the waste material can be reduced 80%-90%.

The hopper we make it half closed, it can stop the material powder comes out when crushing. And also you can add an air filter on the top of the hopper (normally no need for the filter). The hopper is not high, you can feed the material by hand. The hopper can be opened by hand, it is easy for the user to clean the crusher tank. There is a safety switch on the hopper, when you open the hopper, all the machine power will be shut. So the user do not need to worry about the safety.

For the crusher, we use two shaft crusher on this type of machine. The one shaft is welded by 9 sets of blades, and the other one is welded by 10 sets of blades. Each blade is interlaced in different angle. This design can make the blades grab the material, and force the material geting down to the barrel. Two shafts are driven by two gearbox separately. There is also a screen at the bottom of the crusher tank to filter the materials in the crusher.

• Suitable for medium-sized recycling centers or seafood markets.
• The height of the feeding port is moderate, which is convenient for feeding and ensures safety.
• CF-HM200 EPS hot melting machinery can process different types of foam materials, such as foam boxes, foam boards, etc.