Technical parameters: EPS Hot Melting Machine CF-HM-200 Screw diameter φ197 mm Screw distance 150 mm Screw speed 110 r/min Capacity 100～120Kg/h Screen hole diameter 40mm Extrusion center height 326 mm

In recent years,Recycling of waste plastic regeneration in the ascendant. The EPS’s Wide use in the packaging industry, but it is bulky and difficult to transport.With the tenet of reducing the pollut

The two shaft crushing blades in the EPS Hot Melting Machine can broke the EPS material into small blacks and go through the screen. The material that can’t go through the screen will be crushed again

Technical parameters : EPS Hot Melting Machine CF-HM100 Feeding Size 650mmx400mm Screw diameter φ138mm Screw Length 1090mm  Screw Speed 165rpm Extrusion center hight 250mm Heating power 3kw  Main moto

Through numerous experiments on the Styrofoam Compacting Machine and continuous improvement, to create a superior performance. EPS compactor is controlled unit is based on PLC automatic control system

Technical parameters for EPS Compactor: Most polystyrene products are currently not recycled due to the lack of incentive to invest in the compactors and logistical systems required. Due to the low de

ZhangJiaGang Qinfeng machinery Co.,Ltd is located near the “Golden Waterway of the YangTze River” in the city of ZhangJiaGang, two hours drive from ShangHai Pudong International Airport. Since 2010 Qi

This EPS Hot Melting Machine is High-performance, space saving, easy to transport the finished produce. The operation is pollution-free, can protect the environment, and avoid the secondary pollution.

Working Principle of CF-HM200 Foam Hot Melting Machine: When the two shaft crushing blades are working，two parallel blade shafts with different rotation direction begin to rotate, form a wave down the

The EPS Hot Melting Machine CF-HM400 use four shaft crushing blades, four parallel blade shafts symmetrically fixed with blade ，the blade on the four blade shafts is dislocation arrangement, and the b