Qinfeng Compactor Machinery can provide you with Styrofoam Compactor/EPS Compactor/Foam Compactor/EPS Hot Melting Machine/EPS Melter/Foam Hot Melting Machine

Products /

EPS Melting Equipment

eps-melting-equipment-4

Features of EPS Melting Equipment:
Through numerous experiments on cold press and continuous improvement, to create a superior performance. Its control unit is based on Schneider PLC-twidosoft20DTK automatic control system and a peripheral circuit performance is extremely reliable.
Main features are as follows:
A. Clear parameter settings and status display shows
B. reliable performance and simple operability
C. Action responsive, good timeliness
D. Multiple fault alarm protection

type-of-compactor-4

Demand conditions of EPS Melting Equipment:
1. Altitude: less than sea level 1000 m, or according to GB 3859 Appendix B amended.
2. For the control cabinet, its surrounding ambient temperature should be -10 ℃ – +40 ℃ rectifier transformer.
3 Maximum relative air humidity should be 90% (in air temperature 20 ± 5 ℃).
4 in the frequency range of AC voltage fluctuations must not exceed ± 2%.
5 AC sinusoidal voltage fluctuations in the amplitude range must not exceed the rated value ± 10%.2.

eps-melting-equipment-5

Qinfeng Machinery is a EPS Compactor Machine manufacturer and supplier in China which can provide you with high quality of EPS Melting Equipment.

EPS Melting Equipment
Model CF-CP-250
Capacity 100kg/h
Screw diameter φ290mm      Q235-A
Input size 1000mmx600mm
Screw rotation speed 36rpm
Crushing blade 2Sets  9+10
Blade rotation speed 120rpm
Main motor 7.5 kw
Crusher motor 2.2kw X 2
Hydraulic station motor 1.5 kw
Production size 250×250mm
Outline 3000×1300×2100
Weight 1400Kg

Leave a Reply

Your email address will not be published. Required fields are marked *

Related products